Choose your country and language

Europe

Asia

International

Maintenance kit

Exterior wood maintenance

A wooden front door lasts for decades if its paint stays intact. With the MAS maintenance kit, half an hour and two water-based products, once or twice a year, are all it takes to clean, revive and protect wood exposed to sun and rain.

By the MAS workshop in Teramo · Updated on

MAS exterior wood maintenance kit with Renner Rio Verde: t.clean RR 1050 neutral cleaner, t.top+ RR 1250 reviver, two microfibre cloths and gloves

In short

How often
Once or twice a year; twice on façades facing south, west or the sea.
What you need
A water-based neutral cleaner, a protective reviver and microfibre cloths.
How long
About half an hour for a front door, without removing it and without sanding.
What to avoid
Solvents, alcohol, abrasive sponges and pressure washers, which damage the paint.

Why do it

Wood is protected by looking after the paint

Sun, rain, smog and salt air do not attack the wood straight away: first they wear away the layer of paint that protects it. As long as that film stays intact, the wood underneath is safe. When it gets thinner, the finish turns dull, the colour fades and water starts to penetrate the fibres.

Routine maintenance means stepping in at this stage: cleaning the surface and renewing the protection before the paint cracks. It takes a few minutes and saves you, years later, from sanding and completely repainting the door.

The kit is designed for the wooden surfaces we make in our workshop — made-to-measure wooden front doors and the solid wood and marine plywood panels of the Acqua e Sale collection — but it works on any wooden door or window painted with water-based products.

Natural oak front door with a black vertical pull handle under a porch: the grain stays alive if the finish is looked after
Riale, in natural oak: the grain stays alive if the finish is renewed in good time.

What’s in the box

What the wood maintenance kit contains

Two water-based products from the Rio Verde line by Renner Italia, MAS partner for wood paints, and everything you need to apply them.

  • RR 1050

    t.clean — water-based neutral cleaner

    Spray for routine cleaning: it dissolves dust, smog and salt residue without attacking the paint film. Being neutral, it does not dull or yellow the finish.

  • RR 1250

    t.top+ — water-based reviver

    Applied after cleaning: it revives the colour, restores the shine of the finish and renews the surface protection that sun and rain wear away over time.

  • Cleaning and application

    Two microfibre cloths

    One for the cleaner, one for the reviver: microfibre holds dirt without scratching and spreads the product evenly, without leaving lint.

  • Protection

    Nitrile gloves

    To work cleanly and keep your hands away from the products during application.

How to use it

Exterior wood maintenance in 4 steps

About thirty minutes for a front door, without removing it and without sanding. Always follow the instructions on the packaging as well.

  1. Remove the dust

    Wipe a dry cloth over the whole surface, paying particular attention to mouldings, raised panels and the bottom of the door, where dirt from splashing rain builds up.

  2. Clean with t.clean

    Spray the cleaner onto the first microfibre cloth, not directly onto the wood, and clean one area at a time following the grain. Let the surface dry.

  3. Apply t.top+

    With the second, clean cloth, spread the reviver in a thin, even layer, always in the direction of the grain. Two light coats are better than one heavy one.

  4. Let it dry

    Do not touch the surface until the product is dry. Work in the shade and in mild temperatures: in direct sunlight the product dries too quickly and leaves marks.

How often

Frequency by exposure

Recommended frequency of exterior wood maintenance
ExposureIndicative frequency
Sheltered (porch, north side)Once a year
Facing south or westTwice a year
Seaside or high mountain locationsTwice a year, with a check at the end of winter
After building or façade workStraight away, to remove dust and residue

The sign that matters more than the calendar: when the finish turns dull or the colour fades, it is time to act.

Don’ts

What to avoid on painted wood

  • Solvents, alcohol and thinners: they dissolve the paint film.
  • Bleach, ammonia and degreasers: they dull and yellow the finish.
  • Abrasive sponges and scourers: they scratch the surface and let water in.
  • Pressure washers: the pressurised jet forces water into the joints.
  • Working in the sun: the products dry too quickly and leave marks.

When more is needed

When the kit is no longer enough

If the paint is cracked or peeling, or the wood looks grey and dry, the protection is worn out: cleaning and reviving are no longer enough and the paintwork needs restoring. Send us a photo of your front door: we will tell you whether maintenance is enough or whether it is worth doing more.

Frequently asked questions

Questions about exterior wood maintenance

How often should exterior wood be maintained?

As a rule of thumb, once a year for a sheltered front door and twice a year for doors facing south or west or in seaside locations. The sign not to ignore is a finish that turns dull or lighter: that is the time to clean and revive it.

What should a painted wooden front door be cleaned with?

With a water-based neutral cleaner and a microfibre cloth. Avoid solvents, alcohol, bleach, ammonia, abrasive sponges and pressure washers: they attack the paint film and leave the wood unprotected.

What does the MAS wood maintenance kit contain?

The water-based neutral cleaner t.clean (RR 1050), the water-based reviver t.top+ (RR 1250), two microfibre cloths and a pair of nitrile gloves. The products belong to the Rio Verde line by Renner Italia, MAS partner for wood paints.

Does the wood need sanding before using the kit?

No. The kit works on the existing finish while it is still intact: you clean and revive it, without sanding and without removing the door. Sanding is only needed if the paint is already cracked or peeling.

Is the kit also suitable for windows and security door panels?

Yes, for all exterior wood surfaces painted with water-based products: front doors, solid wood or marine plywood security door panels, windows and shutters. It is not needed for aluminium, HPL or metal surfaces.

When is the kit no longer enough?

When the paint is cracked or peeling, or the wood looks grey and dry: the protection is worn out and the paintwork needs restoring. In these cases, contact us for an assessment.

Made to measure

Request the MAS maintenance kit

Write to us or call us: we will explain how to get the kit and which maintenance frequency suits your front door.